MAIN FEATURES
Their particular construction allows water to be sucked in even in the presence of air.
The electric pumps must always be installed with the motor in a horizontal position.
The Condenser is permanently inserted in the single-phase version. Protection supplied by the user for the three-phase version.
ADVANTAGES
They can be used in domestic systems for water supply with suction from wells, and for automatic distribution of water with tanks and autoclaves, for irrigation of gardens and gardens
Suitable for pumping clean water without abrasive particles and chemically non-aggressive liquids.
MANUFACTURING SPECIFICATIONS
- Pump body = Cast iron
- Motor support = Cast iron
- Impeller = Noryl for Jet/N - Brass for Jet
- Diffuser= Noryl
- Shaft = Stainless steel AISI 420
- Mechanical seal =Aluminium/Graphite for Jet/N Ceramic/Graphite for JET
- Maximum Temperature = Liquid -15°C ÷ +70°C
- Environment = +40°C
- Maximum Pressure = 8 Bar
- Motor = Asynchronous 2 poles, C.I. F, IP 44
TECHNICAL SPECIFICATIONS
Manometric suction up to a maximum of 9 m with a bottom valve, or check valve on suction, over 3 m we recommend the installation of a suction tube with an internal diameter greater than the suction mouth.
The electric pumps must always be installed with the motor in a horizontal position.
The Condenser is permanently inserted in the single-phase version. Protection supplied by the user for the three-phase version.
