MAIN FEATURES
The electric pumps must always be installed with the motor in a horizontal position.
Manometric suction up to a maximum of 8 m with a bottom valve, or check valve on suction, over 3 m we recommend the installation of a suction tube with an internal diameter greater than the suction mouth.
Condenser is permanently inserted in the single-phase version.
Built-in thermo-amperometric protection on request.
Protection supplied by the user for the three-phase version.
ADVANTAGES
It is possible to use them for domestic and civil uses, for rainwater recovery, for irrigation systems, small gardening, for pressurisation and distribution of water combined with autoclave tanks.
Suitable for pumping clean water without abrasive particles and chemically non-aggressive liquids.
MANUFACTURING SPECIFICATIONS
- Pump body: AISI 304 stainless steel
- Motor support: Cast iron
- Impeller: AISI 304 stainless steel
- Shaft: AISI 420 stainless steel
- Mechanical seal: Ceramic / Graphite
TECHNICAL SPECIFICATIONS
- Maximum Temperature: Liquid -15°C ÷ +110°C
- Environment +40°C
- Maximum Pressure: 10 Bar
- Engine: Asynchronous 2 poles, C.I. F, IP 55
